Metal stamping parts are the products we usually come into contact with. It is made by cutting, bending, punching, forming and other processes of metal materials in the cavity through the pressure of the mold and the punch. So what are the precautions for metal stamping parts in production? Xiaoshuo will work with you to understand:

Metal stamping parts
1. Regularly check the die installation base of the punch turntable and stamping parts to ensure the coaxial accuracy of the upper and lower turntables.

2. Hardware stamping parts should be strictly inspected before installation and use, dirt should be removed, and the guide sleeve and die of drawing stamping parts should be carefully checked for good lubrication non metallic conduit.

Metal stamping parts
3. In order to ensure the service life of the tension and compression parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the tension stamping parts.

4. When installing the mold, the stamping personnel should use soft metal manufacturing operating tools to prevent damage to the stamping parts during the installation process.

Metal stamping parts
5. When the punch and die cutting edges of stamping parts wear out, stop using them in time and sharpen them in time, otherwise it will rapidly expand the wear of the mold cutting edges, accelerate the wear of the mold, and reduce the quality and life of the die.

Metal stamping parts
Ruishuo has been focusing on metal stamping parts with 15 years of ingenuity, and has 20,000+ sets of customized mold production experience. The monthly processing capacity of 100+ sets of stamping dies, the daily production capacity of 3 million stamping cycles, the stamping accuracy can reach 0.01mm, and the 16 quality inspections are strictly controlled.

Metal stamping parts
It can quickly solve the urgent problem of metal stamping parts, solve the problem of stamping accuracy, and solve the problem of production quality. Choose Ruishuo, choose rest assured!